ANASTA Pull Out Trash Can Frame with Full Extension Slides for 7 to 13 Gallon Bins, Black

A pull-out waste frame for a base cabinet: a factory-built sliding carrier on full-extension ball-bearing runners, with a basket and a tension band steadying the load. The bin is yours to supply.

• Bins it holds — 30 to 50 quart (7 to 13 gallon) household bins.
• Cabinet needed — a clear opening measuring at least 13 in wide, 19 in deep and 17 in high, with room left for pipework and other obstructions.
• Fitting — the carrier arrives built up; rest your bin in the basket, check the travel within the cabinet for alignment, then fasten the runners using the 14 screws provided. A few minutes with a driver does it.
• Full extension runners — the carrier travels clear of the opening, so bag changes and cleaning happen in the open.
• Listed figures — iron frame, black, 8 lb. The 200 lb (90 kg) figure quoted for the runners is the maker's own rating rather than a tested working limit.

Notes on the source data: the dimension field reads 17.32 x 13.07 x 5.28 in, and a 5.28 in height cannot house a 13 gallon bin inside a cabinet the same listing says must stand 17 in tall, so work from the cabinet requirement. The material field says iron while the description calls the frame steel, so no single material is asserted. Where the listing sets out its own measurements, take them as approximate.