petisal Two-Tier Under-Sink Racks with Moulded Baskets on Steel Tubes, Set of Two

Two racks per order. Each is built from a reinforced base, four moulded baskets and eight steel tubes that push together, giving a two-level stack whose bottom basket slides forward as a drawer.

• Bottom bay clearance reaches about 10.3 in, tall enough for detergent bottles standing upright.
• Build: tough moulded baskets on steel tubing over a reinforced base. The material field lists plastic alone and omits the steel that the parts list confirms is present.
• Assembly is push-fit: run the four tubes between base and upper basket, then drop the sliding drawer in.
• Each rack weighs about 750 g.

Two conflicting footprints appear in the source — 15.4 in wide by 8.7 in deep on the spec table against 14.5 in by 8 in in the description — so no single footprint is published. Height reads 13 in in both. The Capacity field says 10 kilograms, which sits oddly beside the 10.3 in clearance quoted in the description; the two look like one number carried into the wrong unit, so no load figure is published. A damp cloth is all the cleaning needed.