PXRACK Mesh Two-Tier Under-Sink Racks with Framed-Cabinet Shim Pads, Set of Two

Two steel racks with mesh baskets rather than open wire, so a small jar or a folded cloth sits flat instead of tipping between bars. Each rack can be assembled to open toward either flank of a cabinet, which matters when plumbing forces the slim deck to one side.

• Baskets: lower 16 in deep by 11 in wide, upper 15.35 in deep by 7.5 in wide.
• Shim pad included for face-framed cabinets, working with frame lips as deep as 1 in.
• Load: PXRACK rates the frame at 50 lb, over a reinforced 1 in border.
• Both decks glide on rounded runners with a stop against over-travel; handles are rounded bar.
• A 3 in raised lip keeps tall sprays from toppling over the edge.
• Four suction feet and two adhesive pads hold each rack in position.

Overall size is 16 in deep, 11.7 in wide, 16.5 in tall, and the pair weighs 4.1 kg. Five height positions are offered; the source quotes their span as 11.7 in to 16.5 in, but 11.7 in is also the width figure, so the lowest setting is not published here. Two finish descriptions appear as well, powder coating in one field and baked paint in another, so no finish type is published. Mesh decking lets air move through a loaded stack. Assembly runs about five minutes per rack. Dry the steel after spills to protect the coating.

THIS PRODUCT IS SOLD WITHOUT ANY EXPRESS WARRANTIES BEYOND THOSE PROVIDED BY THE ORIGINAL MANUFACTURER. PLEASE REVIEW PRODUCT SPECIFICATIONS CAREFULLY BEFORE PURCHASING.