Simple Houseware Heavy Duty Expandable Two-Tier Under-Sink Rack, Bronze Alloy Steel Shelving

A stepped rack for the cupboard beneath a sink, made so the frame opens out around a waste pipe and each of its two levels can be set independently. Alloy steel throughout, in a bronze finish.

• Width: opens between 15.75 and 25 inches. The single 25 inch width in the specification table is the fully extended reading, not the size as it leaves the carton.
• Depth and height: 11.75 inches deep, 15.25 inches tall. Frame weight is 4.3 lb.
• Shelf panels: three wide and four narrow perforated pieces drop in or lift out, so an opening can be left wherever pipework rises.
• Tier positions: four height settings for the upper level.
• Stated load: the maker puts each level at 22 lb or better, a figure it publishes without any test reference.
• Non-slip feet steady it on tile, board or a cabinet liner. Assembly is required before use.

Perforated panels shed water rather than holding it, and this is not a sealed tray. A leaking trap will still reach the cupboard floor, so pair the rack with a mat where drips are a concern.