HOWDIA Stainless Steel Over-the-Sink Dish Drying Rack with Utensil Holder and Hooks

A stainless steel frame that bridges the sink, lifting drying dishes off the counter entirely. Plates, pans, a chopping board, cutlery and a sponge all find a place on it, and water runs straight back down to the basin.

• Fittings included: a cutlery cup, a board slot, a sponge cradle and eight hooks along the uprights for cloths and cleaning tools.
• Stainless throughout, chosen against corrosion and scuffing; four suction pads under the legs steady it on a worktop.
• Measure before ordering. The maker asks for a sink no longer than 32.5 in, a tap under 16.6 in tall, and at least 33 in of clear height between worktop and the underside of any cabinet.
• Assembly needs only the hex driver and spanner in the box; parts come apart again if you want a different arrangement.
• Clean with soapy water and dry it off. Stainless resists rust but standing droplets around the joints will mark it over time.

Three conflicts in the source we could not settle:

• The product name calls this a two-tier rack; a bullet and the colour field both describe three tiers. We publish no tier count.
• Two sets of overall dimensions circulate: 32.36 x 10.23 x 33.86 in on the attribute sheet against 33.7 x 11.4 x 32.1 in in the bullets. Treat either as approximate and measure your own sink.
• One bullet states the size is fixed while another says every part adjusts. The frame is bolted, so plan around a fixed footprint.

The colour field reads 3 Tier,silver, which is a configuration code with a colour appended rather than a finish. A 66 lb load limit is the maker's own figure, not a tested one.

THIS PRODUCT IS SOLD WITHOUT ANY EXPRESS WARRANTIES BEYOND THOSE PROVIDED BY THE ORIGINAL MANUFACTURER. PLEASE REVIEW PRODUCT SPECIFICATIONS CAREFULLY BEFORE PURCHASING.