Kitstorack Soft-Close Wooden Cabinet Drawer, 21 in Deep Roll-Out Shelf for Pots and Pans

A single wooden glide-out shelf that turns a deep base cabinet into a drawer you can reach into. The runners mount either against the cabinet base or on the side walls, and the shelf travels its whole length, so cookware stored at the rear comes forward to meet you.

• Sizing: the wooden box measures 14 in wide, 21 in deep and 3.2 in tall; once its pair of runners is attached, the assembly occupies 15 in of width. The attribute sheet instead prints an overall height of 3.4 in, so allow the larger figure when checking clearance.
• Openings: base mounting calls for at least 16 in of interior width, over 22 in of depth and more than 4.5 in of height. Side mounting is described as needing an interior width of exactly 14 in — which leaves nothing for the runners themselves, so measure and confirm before choosing that route.
• Three-section metal runners with a damped closing action. Kitstorack rates them at 70 lb even at full travel.
• Box cut from 0.7 in knot-free timber under a twin clear topcoat, sitting on a 0.3 in plywood base panel.
• Ships flat; the box and runners are assembled by the buyer, following the printed instructions.

Timber under a clear lacquer: wipe with a barely damp cloth and dry at once. Never soak it, and keep it well away from a dishwasher.

Hinges, waste pipes and similar obstructions eat into a usable opening, so subtract them from whatever you measure.

THIS PRODUCT IS SOLD WITHOUT ANY EXPRESS WARRANTIES BEYOND THOSE PROVIDED BY THE ORIGINAL MANUFACTURER. PLEASE REVIEW PRODUCT SPECIFICATIONS CAREFULLY BEFORE PURCHASING.