GSlife 2-Tier Dish Drying Rack, Extends 14.4" to 22.4", 16.9" Across with a Rotating Drain Spout, Black

The frame telescopes. Its longer axis runs from 14.4" closed to 22.4" opened, so the rack can be stretched out after a heavy cook and pushed back in once the draining is done. The other side measures 16.9", and overall height is 13.4".

Two levels divide the load. The upper rail is quoted as taking up to 11 plates; a roomier lower deck stays open for pans, bowls, glasses and bottles. Legs are flat iron, screw-jointed rather than clipped, and side supports come pre-fitted, so setting up means unfolding and locking.

Water leaves through a spout that swivels a full circle, letting you aim the flow at whichever side of the rack your sink happens to be on, and raised feet lift the base so the run has somewhere to go. Throughout, the metal is carbon steel under a rust-resistant coating, finished in black; total weight is 6 lb.

Two things to note in the source. The dimension panel and the description label the same numbers differently, giving 16.9" as depth in one place and width in another, so read the body as 16.9" by 13.4" high with the variable measurement along the telescoping run. The listing headline also mentions a utensil holder and a cup holder, and no drip tray is described anywhere; none of those three appear in the parts detail or feature list, so do not count on them.

• Two tiers; telescopes 14.4" to 22.4"
• Body 16.9" on the fixed axis, 13.4" high
• Upper rail quoted at up to 11 plates
• Spout rotates a full 360 degrees; raised feet
• Carbon steel, rust-resistant coating, black
• Listed at 6 lb; utensil holder, cup holder and tray unconfirmed

The spout has to sit over the sink opening for drainage to work, so the rack needs a stretch of worktop directly beside the sink measuring at least 22.4" when fully extended.