ANBOXIT Metal Appliance Slider, 10 by 12 Inch Rolling Tray for Coffee Makers and Countertop Appliances

A flat metal tray on low-friction pads that lets a drip brewer or an air fryer glide forward from under a wall cabinet, then slide back out of the way. This is the wide, shallow version: 12 inches across the front by 10 inches deep, which suits a standard two-way filter machine, a compact air fryer or a toaster.

• Sits barely half an inch proud of the worktop, so the appliance still clears a low-hung cabinet above.
• Rust-resistant metal panel rather than plastic, unbothered by the steam and heat a coffee maker throws off.
• Cut-out handles at the sides give a proper grip when the load is heavy.
• Teflon-faced pads underneath turn in any direction, so the tray pivots as easily as it slides.
• Matte black, which disappears against most machines.
• Recorded weight is 2 lb; the 12.28 x 10.24 x 0.67 inch figure is the shipping carton, so the tray itself is marginally smaller.

Pulling the machine out to refill or clean it keeps steam away from the cabinet fronts above. No load rating is published, so judge heavier stand mixers by feel rather than by a number.