SNSLXH Over-Sink 2-Tier Dish Drying Rack, Extends 26.57 to 35 in, 4 Baskets

This rack bridges the sink itself. Draining dishes sit above the bowl on two levels, and the worktop either side stays clear.

Two clearances decide whether it will fit. The tap has to stand lower than 21.26 inches, and there needs to be 25.6 inches or more between worktop and the underside of the wall cupboard above.

The frame telescopes sideways from 26.57 inches out to 35, covering single bowls and divided ones alike. Assembled, it runs 35 inches long, 10.63 deep and 21.26 high. A tolerance of 0.4 to 0.8 inch is quoted, so take your measurements with care before committing.

Accessories arrive as a kit: a dish tier, one large cutlery holder and one small, a sponge tray, a knife slot, a cup rail, a cutting board rest and five hooks. Every piece except the dish tier and the large cutlery holder detaches and repositions along the frame.

Steel construction in black, rated by the maker to 50 lb.

Note that the specification table records a 1 x 1 x 1 inch size and a 200 g weight, neither of which can describe a rack of this span; the figures above come from the maker's own description.

• Spans the sink, two drying tiers
• Extends 26.57 in to 35 in
• Tap must stand under 21.26 in
• 25.6 in minimum worktop-to-cupboard gap
• Four baskets plus knife, cup and board holders
• Steel, black, 50 lb rating