AMZABBY Adhesive Cabinet Door Lid Rack, 2 Baskets in XL and Large, 4.3" Deep, Carbon Steel

Fitting hinges on one measurement: a 3" gap must be free between shelf front and closed door, or the basket will foul the door as it shuts. Basket depth is 4.3", which takes a run of container lids stood on edge rather than lying in a heap.

The pair is not a matched pair. One rack is the extra-large at 9.8 by 4.3 by 5.5 inches and the other a size down at 9.4 by 3.9 by 5.3 inches, so the listing name reading as two large units is a little misleading. Both are pressed from carbon steel in a metallic finish, and the two together are listed at 0.5 kg.

Mounting works two ways. Adhesive strips give a no-drill fix on a smooth door or cabinet wall, and screws are the alternative where the surface will not hold tape; fixings for both methods are supplied. Neither a hold rating for the adhesive nor a load limit for the basket appears anywhere, so keep the contents light — lids, liner rolls, brushes, small trays.

• Two racks: 9.8 x 4.3 x 5.5 in and 9.4 x 3.9 x 5.3 in
• Carbon steel, metallic finish
• Basket depth 4.3" for lids stood on edge
• Adhesive strips or screws, both supplied
• Pair listed at 0.5 kg
• No adhesive hold rating or load limit published

Three inches of free room between shelf front and closed door is essential; measure before you commit to the adhesive. Adhesive mounting depends on the surface being smooth, clean and dry — where it will not hold, use the screw fixing provided.