Lifewit Adjustable Drawer Dividers, 12-Pack, 2.36 in High, 16 to 22 in Span

A dozen panels in one box, each sprung to brace between two drawer walls set 16 to 22 inches apart — 40 to 56 cm in metric.

To fit one: hold the release catch down, shorten the panel, set it inside the drawer, let it extend against both sides, then lock the slider so tension cannot creep. Reverse those steps to take it out.

Each panel stands 2.36 inches tall and 0.8 wide, moulded in ABS — stiffer than wood at the same thickness and far less inclined to split.

EVA foam caps both ends, so pressure lands on padding rather than bare drawer sides, and a toothed catch holds the extension where it was set.

They run either direction across a drawer, which lets one long panel take cross-pieces at right angles.

White, 2200 g for twelve.

• Twelve panels per box
• Spans 16 to 22 in (40 to 56 cm)
• 2.36 in tall, 0.8 in thick
• ABS panels, EVA foam end caps
• Sprung with a toothed locking catch
• White, 2200 g for the set